| Customization: | Available |
|---|---|
| Material: | Nomex |
| Medium Material: | PTFE |
|
Still deciding? Get samples of US$ 40/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The technical data of Nomex needled felt
Nomex filter bag, Nomex filter, Aramid filter, Aramid bag filter, Nomex bag filter, dust filter bag,dust collection bags,
More about Nomex Filter Bags
| Nomex Membrane Needle Felt Nomex | ||||||||
| Item | Unit | Parameter | ||||||
| Material | Face:100%Nomex | Scrim:100%Nomex | ||||||
| Grammas Per Square Meter | g/m2 | 550±5% | ||||||
| Thickness | mm | 1.8±0.1 | ||||||
| Air Permeability(200Pa) | L/dm2.min | 20-50 | ||||||
| Temperature Resistance | Cont | ºC | 204 | |||||
| Peaks | 240 | |||||||
| Minimum Breaking Strength | Warp | N/50*200mm | ≥800 | |||||
| Weft | ≥1000 | |||||||
| Elongation at Break | Warp | % | ≤30 | |||||
| Weft | ≤50 | |||||||
| Surface Design Treatment | Singeing,Calendering,Heat-set | |||||||
| Using Scope | Cement klin ,Asphalt Mixing | |||||||
Filter bags, dust collector bags, dust bags, filter socks, bags, tubes, socks - they all mean the same thing: An industrial grade fabric filter made from heavy duty material, all textile based, used in dust collecting systems, in either process filtration or pollution control.
dust filter bag ,dust collector filter bag ,bag filter ,Nomex filter bags ,Aramid filter bag.
The main type of dust filter bags including Nomex filter bag ,PPS filter bags ,P84 filter bag ,PTFE filter bags ,Acrylic filter bags ,Polyester filter bags,dust filter bag ,bag filters,dust collector bags.
Dust bags come in 5 basic designs:
Pulse jet bags Nomex filter bags are cleaned using compressed air to mechanically 'pulse' or snap the bag periodically so that the built up filter cake is discharged and the flow through the media is returned to its higher air permeability.Pulse jet bags are installed on wire cage supports and filter from the outside/ in.
In the bottom load design, bags are pre-installed on their cages and then attached to a mounting thimble or cup which hangs down from the underside of the tube sheet. The tube sheet is a metal plate with regularly spaced holes which serves as the top of the gas tight metal box known as a dust collector. The top edge of the bottom loading bag is normally tucked into the cage and the entire assembly is attached to the thimble or cup with a hose clamp.
Installation of bottom loading bags is more difficult because of being on the dirty side of the collector and having no catwalks or surfaces on which to stand. Some bottom loaders are on the top of large storage bins on tall silos which make installation potentially dangerous. Bottom loader collectors are frequently used when headroom above the collector is not adequate for top removal design bags.
Bottom loading bags are less expensive than comparable size top loaders because the top is plain with no special attachment features.
){kind=link}